Documentation

Recent Changes

Remote FPGA Debug for Agilex 7
Remote FPGA Debug over Ethernet for Agilex 7
GSRD for Agilex 7 F-Series Transceiver-SoC DevKit (P-Tile and E-Tile)
Golden System Reference Design for DK SI AGF014EA
Application Development with Yocto eSDK
Using Yocto Extensible SDK for Application Development
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices

Overview
Prerequisites
Procedure
Generated Files
Converting .sof to .rbf

You are here: Documentation » GSRD Compile Hardware Design - Arrow SoCKit Edition

GSRD Compile Hardware Design - Arrow SoCKit Edition

19 March 2014 - 04:16 | | Version 3 | StevenKravatsky | FPGA, GHRD, GSRD

Overview

This page demonstrates how to compile the FPGA Hardware design that is delivered as part of the release.

The compilation will produce the following items:

File	Description
.sof	SRAM Object File - FPGA programming file, resulted from compiling the FPGA hardware project
.sopcinfo	SOPC Info File - containing a description of the hardware to be used by Device Tree Generator
.svd	System View Description File - describes the hardware for the DS-5 debugger
Handoff	Folder containing a description of the hardware to be used by the Preloader Generator

Prerequisites

The following items are required:

Host PC running Linux (CentOS 6.3 or newer or Ubuntu 12.04LTS or newer preferred)
Altera Quartus™ II v13.1 - available from http://www.altera.com/products/software/sfw-index.jsp
GHRD Archive from sockit_ghrd_13.1.tar.gz

Procedure

The procedure described below uses the Cyclone V GHRD. The procedure for Arria V GHRD is similar, with only the file names being changed:

File	Cyclone V
GHRD Archive	sockit_ghrd_13.1.tar.gz
Quartus Project	sockit_ghrd/soc_system.qpf
Qsys File	sockit_ghrd/soc_system.qsys
Programming File	sockit_ghrd/output_files/soc_system.sof

Open Quartus Project

1. Retrieve and the archive file sockit_ghrd_13.1.tar.gz containing the hardware design and save it in the home folder. The file is available at sockit_ghrd_13.1.tar.gz.

2. Extract the files from the archive

$ cd ~
$ tar xzf sockit_ghrd_13.1.tar.gz

3. Make all the files writable (optional)

$ chmod 777 -R ~sockit_ghrd

4. Start Quartus tool by double clicking the icon on the desktop, or by running it from the command line:

$ ~/altera/13.1/quartus/bin/quartus --64bit

5. In Quartus, go to File → Open Project ..., browse to the file sockit_ghrd/soc_system.qpf and click Open.

6. Quartus will load the project.

Generate System in Qsys

7. In Quartus, go to Tools → Qsys to start the Qsys tool

8. Qsys tool will start and ask you to open a Qsys file. Select sockit_ghrd/soc_system.qsys and click Open.

9. Qsys will load the file

10. In Qsys, select Generate -≫ Generate this will open the Generate dialogue box.

11. In the Generate dialogue box, click the Generate button.

12. A message will be displayed when the generation is complete (may take a few minutes depending on host machine speed)

13. Click Close button in the Generation window to close it.

14. In Qsys, go to File → Exit to close Qsys.

Compile the Design in Quartus

Running Analysis & Synthesis

15. In Quartus, in the Tasks panel change the flow from RTL Simulation to Compilation.

16. In the Tasks panel, right click Analysis and Synthesis and select Start.

17. After a few minutes (depending on host machine speed) the Analysis & Synthesis will finish and a message will be displayed.

Running SDRAM Pin Assignment TCL Script

18. In Quartus, go to Tools → Tcl Scripts

19. In the TCL Scripts window, select the hps_sdram_p0_pin_asignments.tcl file and click Run.

Error: (3) can't find select-tcl-script.png in Documentation

20. A notification window will appear when the script is completed.

Running the Assembler

21. In the Tasks panel, select Assembler, right click it and select Start.

Error: (3) can't find start-assembler.png in Documentation

22. After the assembly phase is completed, a notification message will be displayed.

Generated Files

This section presents the name and location of the files resulted from compiling the hardware design.

File	Description
sockit_ghrd/output_files/soc_system.sof	SRAM Object File - for programming FPGA
sockit_ghrd/soc_system.sopcinfo	SOPC Info File - Used by Device Tree Generator
sockit_ghrd/soc_system/synthesis/soc_system_hps_0_hps.svd	System View File - Used by ARM DS-5 AE
sockit_ghrd/hps_isw_handoff	Handoff folder - Used by Preloader Generator

Converting .sof to .rbf

The SOF (SRAM Object File) file can use used to program the FPGA from the Quartus Programmer tool.

However, for the purpose of programming the FPGA from software, the SOF file needs to be converted to a RBF (Raw Binary File) format.

Several different options are available for converting the file:

A. Using the command line tools from Quartus Programmer (installed by default with the SoC EDS or installed standalone) or from Quartus.

 $ ~/altera/13.1/quartus/bin/quartus_cpf -c \
  sockit_ghrd/output_files/soc_system.sof  \
  sockit_ghrd/output_files/soc_system.rbf

 $ ~/altera/13.1/qprogrammer/bin/quartus_cpf -c \
  sockit_ghrd/output_files/soc_system.sof  \
  sockit_ghrd/output_files/soc_system.rbf

B. Using the GUI converter, callable from either Quartus Programmer or Quartus by selecting the menu File → Convert Programming Files.

Select the Programming File Type to be Raw Binary File (.rbf)
Select the Mode to be Fast Passive Parallel X8 or 16
Click on the SOF Data then click Add File and browse to the soc_system.sof file
Edit the desired name of the output file to be soc_system.rbf
Click the Generate button

This website is using cookies. More info. That's Fine