RocketBoards- Home
- Documentation
- Community
- Projects
- Boards
- Agilex 5 SoC
- Agilex 7 SoC
- Arria 10 SoC
- Nallatech 385A - Arria 10 FPGA Network Accelerator Card
- Nallatech 385A-SoC Accelerator Card with Arria 10 FPGA
- ALARIC Instant DevKit ARRIA 10 SoC FMC IDK by REFLEX CES
- Altera Arria 10 SoC Virtual Platform
- Altera Arria 10 SoC Board
- Nallatech 510T compute acceleration card with Intel Arria 10 FPGA
- REFLEX CES Achilles Arria 10 SoC SOM
- Terasic Arria10 SoC Board : HAN Pilot Platform
- Arria V SoC
- Cyclone V SoC
- Altera Cyclone V SoC Board
- Arrow SoCKit User Manual - July 2017 Edition
- Arrow SoCKit User Manual - November 2019 Edition
- Arrow SoCKit Evaluation Board
- Atlas-SoC Development Platform
- Critical Link MitySOM-5CSx Development Kit
- Cyclone V Ethernet driver problems
- DE10-Nano Development Board
- Terasic DE10-Standard Development Kit
- Devboards DBM-SoC1 module
- Devboards DBM-SoC2 module
- EBV SoCrates Evaluation Board
- Enclustra Mercury SA1 SoC Module
- Enterpoint Drigmorn 5
- Enterpoint Larg 2
- Altera Cyclone V SoC Development Platform
- Mpression Helio SoC Evaluation Kit by Macnica
- Mpression Sodia Evaluation Board by Macnica
- ARIES Embedded - MCV System on Module
- Mpression Borax SOM Module and Development Kit by Macnica
- Enterpoint Mulldonoch 3
- Networked Pro-Audio FPGA SoC Development Kit by Coveloz
- NOVPEK™CVLite
- NOVSOM®CV
- NOVSOM®CVLite
- NovTech IoT Octopus™
- NovTech NetLeap™
- Enterpoint Raggedstone 4
- Solectrix SMARC compliant System-on-Module
- Terasic DE1-SoC Development and Education Board
- Stratix 10 SoC
- Find a Board
- News
Configuration
Board(s):
Altera Arria 10 SoC BoardTools Version(s):
17.1, 18.0, 18.1, 19.1, 19.3- Select a different Task
Recent Changes
-
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices -
Docker Yocto Build
Using Docker to Build Yocto Recipes
-
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1 -
Building Bootloader for Agilex 7
Building latest bootloaders for Agilex 7 SoC Devices -
Intel Agilex® 7 FPGA I-Series PCIe Root Port Reference Design
Demonstrates a PCIe root port running on Agilex 7 SoC Development Kit
This page needs tagging. Please add keywords describing what this page is about.
Overview
The GSRD release includes a web server running on the target board that can be used to exercise some of the board's features:- Displaying text on the alphanumerical LCD screen
- Turning LEDs ON and OFF
- Scrolling LEDs in a sequence
- Displaying the current status of the LEDs.
Connect to Web Server
1. Boot GSRD Linux release as described in the Booting Linux. 2. Write down the IP address displayed on the first line of the LCD screen. Note that the IP address is displayed only at the boot time, it is not updated if the IP address is changed later, for example by the user. If your board is connected to a network that doesn't have a DHCP server, it will fallback to use IPV4LL IP address after Linux times out waiting for DHCP server's IP, which is about 2 minutes. Note: There are instances where the DHCP have not assigned an IP to the board before the timeout happens, in which case you may check the ip address via the UART by running ifconfigroot@arria10:~# ifconfig3. Open a web browser on the host PC and type http://
Board Features
***The Adobe script for the flash is not available in ACDS18.0 therefore we may not be able to fully utilize the Flash functionalities of the website *** 4. You can hover with the mouse over the board image on the browser, and it will highlight different features. 
Interact With the Board
5. Scroll the webpage down to the section named Interacting with Arria 10 SoC Development Kit
You will be able to perform the following actions: - See which LEDs are ON and which are OFF in the LED Status image. Note that if the LEDs are setup to be scrolling, the displayed scrolling speed will not match the actual scrolling speed on the board.
- Stop LEDs from scrollig, by clicking START or STOP buttons. The delay between LEDs turning ON and OFF is set in the LED Lightshow box.
- Turn individual LEDs ON and OFF witht the ON and OFF buttons. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Blink individual LEDs by typing a delay value in ms then clicking the corresponding BLINK button. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Display text to the alphanumerical LCD Display, by typing the text in the Send to character LCD the pressing the Send to LCD button. Note that the text is displayed in the 2nd LCD line, and it is limited to 16 characters.
SSH Connection Instructions
6. The lower bottom of the web page presents instructions on how to connect to the board using an SSH connection.
7. If the ssh client is not installed on you host computer, you can install it by running the following command on CentOS:
$ sudo yum install openssh-clientsor the following command on Ubuntu:
$ sudo apt-get install openssh-client8. Connect to the board, and run some commands, such as pwd, ls and uname to see Linux in action
© 1999-2024 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
This website is using cookies. More info.
That's Fine