RocketBoards- Home
- Documentation
- Community
- Projects
- Boards
- Agilex 5 SoC
- Agilex 7 SoC
- Arria 10 SoC
- Nallatech 385A - Arria 10 FPGA Network Accelerator Card
- Nallatech 385A-SoC Accelerator Card with Arria 10 FPGA
- ALARIC Instant DevKit ARRIA 10 SoC FMC IDK by REFLEX CES
- Altera Arria 10 SoC Virtual Platform
- Altera Arria 10 SoC Board
- Nallatech 510T compute acceleration card with Intel Arria 10 FPGA
- REFLEX CES Achilles Arria 10 SoC SOM
- Terasic Arria10 SoC Board : HAN Pilot Platform
- Arria V SoC
- Cyclone V SoC
- Altera Cyclone V SoC Board
- Arrow SoCKit User Manual - July 2017 Edition
- Arrow SoCKit User Manual - November 2019 Edition
- Arrow SoCKit Evaluation Board
- Atlas-SoC Development Platform
- Critical Link MitySOM-5CSx Development Kit
- Cyclone V Ethernet driver problems
- DE10-Nano Development Board
- Terasic DE10-Standard Development Kit
- Devboards DBM-SoC1 module
- Devboards DBM-SoC2 module
- EBV SoCrates Evaluation Board
- Enclustra Mercury SA1 SoC Module
- Enterpoint Drigmorn 5
- Enterpoint Larg 2
- Altera Cyclone V SoC Development Platform
- Mpression Helio SoC Evaluation Kit by Macnica
- Mpression Sodia Evaluation Board by Macnica
- ARIES Embedded - MCV System on Module
- Mpression Borax SOM Module and Development Kit by Macnica
- Enterpoint Mulldonoch 3
- Networked Pro-Audio FPGA SoC Development Kit by Coveloz
- NOVPEK™CVLite
- NOVSOM®CV
- NOVSOM®CVLite
- NovTech IoT Octopus™
- NovTech NetLeap™
- Enterpoint Raggedstone 4
- Solectrix SMARC compliant System-on-Module
- Terasic DE1-SoC Development and Education Board
- Stratix 10 SoC
- Find a Board
- News
Installing and Booting a Pre-Built Linux Kernel Installing and Booting a Pre-Built Linux Kernel
Configuration
Board(s):
Altera Arria 10 SoC Virtual PlatformTools Version(s):
n/aTags:
virtual platform, Arria 10- Select a different Task
Similar topics
-
Compiling Linux Kernel and Root Filesystem
How to (re)build the Linux kernel for the A10 nop GSRD.
-
Boot Linux from SD Card
How to create an SD card using pre built SD card image and use it to boot Linux on the Altera Arria 10 nop SoC Development board
-
Boot Linux from SD Card
How to create an SD card using pre built SD card image and use it to boot Linux on the Altera Arria 10 nop SoC Development board
- A10 SGMII Reference Design Booting Linux from SD Card
-
A10 VP - Debugging Linux Applications with the GNU Debugger
Debugging Linux Applications with the GNU Debugger
Recent Changes
-
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices -
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1 -
Intel Agilex® 7 FPGA I-Series PCIe Root Port Reference Design
Demonstrates a PCIe root port running on Agilex 7 SoC Development Kit -
Linux GSRD Intel Simics Virtual Platform for Intel Agilex® 5 E-Series
This page describes the some of the use cases that can be exercised for the Intel Agilex® 5 E Series virtual platform for the Intel Simics Simulator for Intel® FPGAs -
GSRD for Agilex 7 F-Series Transceiver-SoC DevKit (P-Tile and E-Tile)
Golden System Reference Design for DK SI AGF014EA
Prerequisites
Install A10 VirtualPlatform as instructed in Installing Altera Arria 10 SoC Virtual Platform.Download the Prebuilt Linux Kernel
Open a console and go to the directory where your virtual platform is installed:cd <PATH_TO_VP_INSTALL>At the Linux prompt, type the following command to download the Arria 10 SoC Virtual Platform Linux images:
wget --no-cache http://rocketboards.org/foswiki/pub/Documentation/Arria10SoCVPLinux/\ linux-arria10swvp-socfpga-3.10-ltsi-angstrom-v2014.12.tgzUncompress the tgz file by typing the following command:
tar xvzf ./linux-arria10swvp-socfpga-3.10-ltsi-angstrom-v2014.12.tgzThis command creates the following files in the ./Software/arria10/linux/ folder:
- linux-system-sd.elf: contains the Linux kernel image
- sd-angstrom-v2014.12-arria10swvp.img: contains the root file system
Run A10 Virtual Platform
To run the Arria 10 SoC Virtual Platform with the default pre-built Linux binaries, type the following command:cd <PATH_TO_VP_INSTALL> ./run.exeAfter the command runs, an Ångström prompt appears. User root as username and no password to login.
© 1999-2024 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
This website is using cookies. More info.
That's Fine