Overview
This page demonstrates how to compile the FPGA Hardware design that is delivered as part of the
release.
The compilation will produce the following items: | File |
Description |
|---|
| .sof |
SRAM Object File - FPGA programming file, resulted from compiling the FPGA hardware project |
| .sopcinfo |
SOPC Info File - containing a description of the hardware to be used by Device Tree Generator |
| .svd |
System View Description File - describes the hardware for the DS-5 debugger |
| Handoff |
Folder containing a description of the hardware to be used by the Preloader Generator |
Prerequisites
The following items are required:
Procedure
The procedure described below uses the Cyclone V GHRD. The procedure for Arria V GHRD is similar, with only the file names being changed:
| File |
Cyclone V |
Arria V |
|---|
| GHRD Archive |
cv_soc_devkit_ghrd.tar.gz |
av_soc_devkit_ghrd.tar.gz |
| Quartus Project |
cv_soc_devkit_ghrd/soc_system.qpf |
av_soc_devkit_ghrd/ghrd_5astfd5k3.qpf |
| Qsys File |
cv_soc_devkit_ghrd/soc_system.qsys |
av_soc_devkit_ghrd/ghrd_5astfd5k3.qsys |
| Programming File |
cv_soc_devkit_ghrd/output_files/soc_system.sof |
av_soc_devkit_ghrd/output_files/ghrd_5astfd5k3.sof |
Open Quartus Project
1. Retrieve and the archive file cv_soc_devkit_ghrd.tar.gz containing the hardware design and save it in the home folder. The file is available at https://releases.rocketboards.org/2013.11/gsrd/ghrd.
2. Extract the files from the archive
$ cd ~
$ tar xzf cv_soc_devkit_ghrd.tar.gz
3. Make all the files writable (optional)
$ chmod +w -R ~/cv_soc_devkit_ghrd/
4. Start Quartus tool by double clicking the icon on the desktop, or by running it from the command line:
$ ~/altera/13.1/quartus/bin/quartus --64bit
5. In Quartus, go to File → Open Project ..., browse to the file cv_soc_devkit_ghrd/soc_system.qpf and click Open.
6. Quartus will load the project.
Generate System in Qsys
7. In Quartus, go to Tools → Qsys to start the Qsys tool
8. Qsys tool will start and ask you to open a Qsys file. Select cv_soc_devkit_ghrd/soc_system.qsys and click Open.
9. Qsys will load the file
10. In Qsys, select Generate -≫ Generate this will open the Generate dialogue box.
11. In the Generate dialogue box, click the Generate button.
12. A message will be displayed when the generation is complete (may take a few minutes depending on host machine speed)
13. Click Close button in the Generation window to close it.
14. In Qsys, go to File → Exit to close Qsys.
Compile the Design in Quartus
Running Analysis & Synthesis
15. In Quartus, in the Tasks panel change the flow from RTL Simulation to Compilation.
16. In the Tasks panel, right click Analysis and Synthesis and select Start.
17. After a few minutes (depending on host machine speed) the Analysis & Synthesis will finish and a message will be displayed.
Running SDRAM Pin Assignment TCL Script
18. In Quartus, go to Tools → Tcl Scripts
19. In the TCL Scripts window, select the hps_sdram_p0_pin_asignments.tcl file and click Run.
20. A notification window will appear when the script is completed.
Running the Assembler
21. In the Tasks panel, select Assembler, right click it and select Start.
22. After the assembly phase is completed, a notification message will be displayed.
Generated Files
This section presents the name and location of the files resulted from compiling the hardware design. | File |
Description |
|---|
| cv_soc_devkit_ghrd/output_files/soc_system.sof |
SRAM Object File - for programming FPGA |
| cv_soc_devkit_ghrd/soc_system.sopcinfo |
SOPC Info File - Used by Device Tree Generator |
| cv_soc_devkit_ghrd/soc_system/synthesis/soc_system_hps_0_hps.svd |
System View File - Used by ARM DS-5 AE |
| cv_soc_devkit_ghrd/hps_isw_handoff |
Handoff folder - Used by Preloader Generator |
Converting .sof to .rbf
The SOF (SRAM Object File) file can use used to program the FPGA from the Quartus Programmer tool.
However, for the purpose of programming the FPGA from software, the SOF file needs to be converted to a RBF (Raw Binary File) format.
Several different options are available for converting the file:
A. Using the command line tools from Quartus Programmer (installed by default with the SoC EDS or installed standalone) or from Quartus.
$ ~/altera/13.1/quartus/bin/quartus_cpf -c \
cv_soc_devkit_ghrd/output_files/soc_system.sof \
cv_soc_devkit_ghrd/output_files/soc_system.rbf
$ ~/altera/13.1/qprogrammer/bin/quartus_cpf -c \
cv_soc_devkit_ghrd/output_files/soc_system.sof \
cv_soc_devkit_ghrd/output_files/soc_system.rbf
B. Using the GUI converter, callable from either Quartus Programmer or Quartus by selecting the menu File → Convert Programming Files.
- Select the Programming File Type to be Raw Binary File (.rbf)
- Select the Mode to be Fast Passive Parallel X8 or 16
- Click on the SOF Data then click Add File and browse to the soc_system.sof file
- Edit the desired name of the output file to be soc_system.rbf
- Click the Generate button
RocketBoards
GSRD v13.1 - Programming FPGA With Quartus Programmer
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices
Building Bootloader for Agilex 7
Building latest bootloaders for Agilex 7 SoC Devices
Intel Agilex® 7 FPGA I-Series PCIe Root Port Reference Design
Demonstrates a PCIe root port running on Agilex 7 SoC Development Kit