RocketBoards- Home
- Documentation
- Community
- Projects
- Boards
- Agilex 5 SoC
- Agilex 7 SoC
- Arria 10 SoC
- Nallatech 385A - Arria 10 FPGA Network Accelerator Card
- Nallatech 385A-SoC Accelerator Card with Arria 10 FPGA
- ALARIC Instant DevKit ARRIA 10 SoC FMC IDK by REFLEX CES
- Altera Arria 10 SoC Virtual Platform
- Altera Arria 10 SoC Board
- Nallatech 510T compute acceleration card with Intel Arria 10 FPGA
- REFLEX CES Achilles Arria 10 SoC SOM
- Terasic Arria10 SoC Board : HAN Pilot Platform
- Arria V SoC
- Cyclone V SoC
- Altera Cyclone V SoC Board
- Arrow SoCKit User Manual - July 2017 Edition
- Arrow SoCKit User Manual - November 2019 Edition
- Arrow SoCKit Evaluation Board
- Atlas-SoC Development Platform
- Critical Link MitySOM-5CSx Development Kit
- Cyclone V Ethernet driver problems
- DE10-Nano Development Board
- Terasic DE10-Standard Development Kit
- Devboards DBM-SoC1 module
- Devboards DBM-SoC2 module
- EBV SoCrates Evaluation Board
- Enclustra Mercury SA1 SoC Module
- Enterpoint Drigmorn 5
- Enterpoint Larg 2
- Altera Cyclone V SoC Development Platform
- Mpression Helio SoC Evaluation Kit by Macnica
- Mpression Sodia Evaluation Board by Macnica
- ARIES Embedded - MCV System on Module
- Mpression Borax SOM Module and Development Kit by Macnica
- Enterpoint Mulldonoch 3
- Networked Pro-Audio FPGA SoC Development Kit by Coveloz
- NOVPEK™CVLite
- NOVSOM®CV
- NOVSOM®CVLite
- NovTech IoT Octopus™
- NovTech NetLeap™
- Enterpoint Raggedstone 4
- Solectrix SMARC compliant System-on-Module
- Terasic DE1-SoC Development and Education Board
- Stratix 10 SoC
- Find a Board
- News
Documentation
Recent Changes
-
Remote FPGA Debug for Agilex 7
Remote FPGA Debug over Ethernet for Agilex 7
-
GSRD for Agilex 7 F-Series Transceiver-SoC DevKit (P-Tile and E-Tile)
Golden System Reference Design for DK SI AGF014EA -
Application Development with Yocto eSDK
Using Yocto Extensible SDK for Application Development -
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1 -
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices
Table of Contents
Overview
The GSRD release includes a web server running on the target board that can be used to exercise some of the board's features:- Displaying text on the alphanumerical LCD screen
- Turning LEDs ON and OFF
- Scrolling LEDs in a sequence
- Displaying the current status of the LEDs.
Procedure
Connect to Web Server
1. Boot GSRD Linux release as described in the GSRD v14.0 - Booting Linux Using Prebuilt SD Card Image. 2. Write down the IP address displayed on the first line of the LCD screen. Note that the IP address is displayed only at the boot time, it is not updated if the IP address is changed later, for example by the user. 3. Open a web browser on the host PC and type http://<target_ip_address> on the address box and hit Enter.Board Features
4. You can hover with the mouse over the board image on the browser, and it will highlight different features. In the picture below, the memory devices were highlighted by hovering over the HPS DDR3 memory.
Interact With the Board
5. Scroll the webpage down to the section named Interacting with Cyclone V SoC Development Kit
You will be able to perform the following actions: - See which LEDs are ON and which are OFF in the LED Status image. Note that if the LEDs are setup to be scrolling, the displayed scrolling speed will not match the actual scrolling speed on the board.
- Stop LEDs from scrollig, by clicking START or STOP buttons. The delay between LEDs turning ON and OFF is set in the LED Lightshow box.
- Turn individual LEDs ON and OFF witht the ON and OFF buttons. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Blink individual LEDs by typing a delay value in ms then clicking the corresponding BLINK button. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Display text to the alphanumerical LCD Display, by typing the text in the Send to character LCD the pressing the Send to LCD button. Note that the text is displayed in the 2nd LCD line, and it is limited to 16 characters.
SSH Connection Instructions
6. The lower bottom of the web page presents instructions on how to connect to the board using an SSH connection.
7. If the ssh client is not installed on you host computer, you can install it by running the following command on CentOS:
$ sudo yum install openssh-clientsor the following command on Ubuntu:
$ sudo apt-get install openssh-client8. Connect to the board, and run some commands, such as pwd, ls and uname to see Linux in action
© 1999-2024 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
This website is using cookies. More info.
That's Fine