RocketBoards- Home
- Documentation
- Community
- Projects
- Boards
- Agilex 5 SoC
- Agilex 7 SoC
- Arria 10 SoC
- Nallatech 385A - Arria 10 FPGA Network Accelerator Card
- Nallatech 385A-SoC Accelerator Card with Arria 10 FPGA
- ALARIC Instant DevKit ARRIA 10 SoC FMC IDK by REFLEX CES
- Altera Arria 10 SoC Virtual Platform
- Altera Arria 10 SoC Board
- Nallatech 510T compute acceleration card with Intel Arria 10 FPGA
- REFLEX CES Achilles Arria 10 SoC SOM
- Terasic Arria10 SoC Board : HAN Pilot Platform
- Arria V SoC
- Cyclone V SoC
- Altera Cyclone V SoC Board
- Arrow SoCKit User Manual - July 2017 Edition
- Arrow SoCKit User Manual - November 2019 Edition
- Arrow SoCKit Evaluation Board
- Atlas-SoC Development Platform
- Critical Link MitySOM-5CSx Development Kit
- Cyclone V Ethernet driver problems
- DE10-Nano Development Board
- Terasic DE10-Standard Development Kit
- Devboards DBM-SoC1 module
- Devboards DBM-SoC2 module
- EBV SoCrates Evaluation Board
- Enclustra Mercury SA1 SoC Module
- Enterpoint Drigmorn 5
- Enterpoint Larg 2
- Altera Cyclone V SoC Development Platform
- Mpression Helio SoC Evaluation Kit by Macnica
- Mpression Sodia Evaluation Board by Macnica
- ARIES Embedded - MCV System on Module
- Mpression Borax SOM Module and Development Kit by Macnica
- Enterpoint Mulldonoch 3
- Networked Pro-Audio FPGA SoC Development Kit by Coveloz
- NOVPEK™CVLite
- NOVSOM®CV
- NOVSOM®CVLite
- NovTech IoT Octopus™
- NovTech NetLeap™
- Enterpoint Raggedstone 4
- Solectrix SMARC compliant System-on-Module
- Terasic DE1-SoC Development and Education Board
- Stratix 10 SoC
- Find a Board
- News
Configuration
Board(s):
Arrow SoCKit Evaluation BoardTools Version(s):
15.1Tags:
Arrow, Cyclone V, Web Server, SSH- Select a different Task
Similar topics
- Connecting to Board Web Server
- Connecting to Board Web Server
- Connecting to Board Web Server
- Connecting to Board Web Server
- Connecting to Board Web Server
Recent Changes
-
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices -
Docker Yocto Build
Using Docker to Build Yocto Recipes
-
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1 -
Building Bootloader for Agilex 7
Building latest bootloaders for Agilex 7 SoC Devices -
Intel Agilex® 7 FPGA I-Series PCIe Root Port Reference Design
Demonstrates a PCIe root port running on Agilex 7 SoC Development Kit
Overview
The GSRD release includes a web server running on the target board that can be used to exercise some of the board's features:- Displaying text on the alphanumerical LCD screen (currently not available for Arrow SoCKit)
- Turning LEDs ON and OFF
- Scrolling LEDs in a sequence
- Displaying the current status of the LEDs.
Connect to Web Server
1. Boot the GSRD Linux release as described in the Booting Linux Using Prebuilt SD Card Image. 2. Write down the IP address displayed on the first line of the LCD screen. Note that the IP address is displayed only at the boot time, it is not updated if the IP address is changed later, for example by the user. NOTE: the LCD drivers are not included in the current SoCKit Linux release. To find the IP address, type ifconfig at the prompt. Look for the inet addr entry for eth0. 3. Open a web browser on the host PC and type http://<target_ip_address> on the address box and hit Enter.Board Features
4. The webserver on the Arrow SoCKit displays an image showing the features on the front and back of the board, alternating the image every 5 seconds.
Interact With the Board
5. Scroll the webpage down to the section named Interacting with Arrow SoCKit Development Kit
You will be able to perform the following actions: - See which LEDs are ON and which are OFF in the LED Status image. Note that if the LEDs are setup to be scrolling, the displayed scrolling speed will not match the actual scrolling speed on the board.
- Stop LEDs from scrollig, by clicking START or STOP buttons. The delay between LEDs turning ON and OFF is set in the LED Lightshow box.
- Turn individual LEDs ON and OFF witht the ON and OFF buttons. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Blink individual LEDs by typing a delay value in ms then clicking the corresponding BLINK button. Note that this action is only available when the LED scrolling/lightshow is stopped.
- Display text to the alphanumerical LCD Display, by typing the text in the Send to character LCD the pressing the Send to LCD button. Note that the text is displayed in the 2nd LCD line, and it is limited to 16 characters. (This feature is not available on this release of the SocKit GSRD.)
SSH Connection Instructions
6. The lower bottom of the web page presents instructions on how to connect to the board using an SSH connection.
7. If the ssh client is not installed on you host computer, you can install it by running the following command on CentOS:
$ sudo yum install openssh-clientsor the following command on Ubuntu:
$ sudo apt-get install openssh-client8. Connect to the board, and run some commands, such as pwd, ls and uname to see Linux in action
© 1999-2024 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
This website is using cookies. More info.
That's Fine