The IoT Octopus™ serves as a high-end industrial IoT node capable of high accuracy and a high sampling rate of electro-mechanical equipment. With its simultaneous 8-channels, 24-bit, 30 KHz sample rate the IoT Octopus™ can provide connectivity from the electrical grid to the drilling pump, and from the hydro-electro turbine to the industrial air conditioner. The IoT Octopus™ converts analog signals to digital data, rearranges data, analyzes data, stores data and can transmit data to gateways/local servers/cloud servers. With dual-core ARM
® Cortex A9 and 110K LE FPGA, the IoT Octopus™ processing power can do complex computing and data analysis in real time.
IoT Octopus™ Development Board

IoT Octopus Development Board
Block diagram

IoT Octopus Block Diagram
Kit Contents
The IoT Octopus™ is available as a Kit that contains:
- NOVSOM®CV
- IoT Octopus™ base board
- SD card with Linux image and example code
- UART TTL to USB cable
- USB drive with manuals, documentation, quick start guide and Virtual Machine
- Power supply
- Operational mode usage of crypto function for running the secure application
Pre-production Ready
This solution is also Pre-Production ready. The IoT Octopus™ can be taken into production once these steps are completed:
- Customize Linux to your needs
- Customize an enclosure for the solution
- Pass regulatory requirements
- NovTech provides services that assist in achieving these tasks.
More Information on
IoT Octopus™
The IoT Octopus™ serves as a high-end industrial IoT node capable of high accuracy and a high sampling rate of electro-mechanical equipment. With its simultaneous 8-channels, 24-bit, 30 KHz sample rate the IoT Octopus™ can provide connectivity from the electrical grid to the drilling pump, and from the hydro-electro turbine to the industrial air conditioner. The IoT Octopus™ converts analog signals to digital data, rearranges data, analyzes data, stores data and can transmit data to gateways/local servers/cloud servers. With dual-core ARM
® Cortex A9 and 110K LE FPGA, the IoT Octopus™ processing power can do complex computing and data analysis in real time.
IoT Octopus™ Development Board

IoT Octopus Development Board
Block diagram

IoT Octopus Block Diagram
Kit Contents
The IoT Octopus™ is available as a Kit that contains:
- NOVSOM®CV
- IoT Octopus™ base board
- SD card with Linux image and example code
- UART TTL to USB cable
- USB drive with manuals, documentation, quick start guide and Virtual Machine
- Power supply
- Operational mode usage of crypto function for running the secure application
Pre-production Ready
This solution is also Pre-Production ready. The IoT Octopus™ can be taken into production once these steps are completed:
- Customize Linux to your needs
- Customize an enclosure for the solution
- Pass regulatory requirements
- NovTech provides services that assist in achieving these tasks.
More Information on
IoT Octopus™
Features
- Simultaneous 8-Channels 24-bit 30Khz sampling ADC
- 1PPS GPS source for multi-nodes sampling synchronization
- One 1G/100/10 Ethernet PHY connected to HPS (Hard Processor System, dual core Cortex A-9)
- Two 1G/100/10 Ethernet PHYs connected to FPGA
- Up to two RF interfaces, 802.11, ZigBee, 802.15.4, 900Mhz-Long Range, Mesh Network
- RTC (Real Time Clock) with battery backup
- Embedded Security
- 30 HPS signals that can be configured as:
- HPS GPIO
- FPGA I/O signals
- CAN BUS x2
- Additional UART
- SPI
- 30 FPGA signals that can be configured as
- FPGA I/O signals
- HPS signals
- One global clock input
Embedded Security
IoT Octopus™ uses Infineon’s Optiga™Trusted P (SLJ 52ACA150A1) to achieve the following system security features:
- Protected storage of credentials and device configuration information
- Secure boot of the system
- Device authentication to the network
- Secure update of the device firmware and configuration
- Secure communication channel for data exchange of over the network
Applications
- Smart Grid
- Smart City
- Motor Monitor/Control
- Engine Monitor/Control
- Pump Monitor/Control
- Turbine, Elevator, A/C, Power Generator, Industrial Battery Charging and other electro-mechanical equipment
Target Markets
- Industrial & Manufacturing
- Aerospace & Defense
- Agriculture
- Automotive
- Energy
- Transportation
- Utilities
- Mining
Links
Purchase
Error: no images found
Error: (3) can't find IoTOctopus Board.png in Documentation