Raggedstone 4
Block Diagram
Board Features
- x4 PCI Express™ Form Factor
- x4 Gen 1(Gen 2 possible) PCIe Interface
- Altera® SOC with twin ARM® Cortex™-A9
- Linux operating system support
- HPS boot from SPI Flash or SDcard
- Header for remote Reset Switches
- 110K LE of Programmable Logic
- 1 GByte DDR3
- 2 x SPI Flash
- 1 x 10/10/1000 Ethernet
- 1 x H/W MAC Address
- 1 x OTG USB I/F
- 1 x Real Time Clock
- 1 x 7 Segment LED Display
- 2 x DIL Header for add-on modules with 3.3V available for module power.
- 2 x Push Switches
- 4 LEDs
- 1 x MMC/SD® Card Socket
- Single 12V power input taken from 2.1MM Jack, Disk drive Connector or PCIe Interface
Raggedstone 4 is aimed at applications that need a hardware acceleration function, a custom I/O or interface requirement, a high accuracy interface timing function, high bandwidth input to a PC, or any combination of these features.
Raggedstone 4 normally operates inside a host PC plugged into a PCI Express slot. However it can also run as a standalone board powered through the 2.1mm jack or disk drive connector with a single 12V input.
The marriage of the powerful dual core ARM® Cortex™-A9 processor, a user programmable FPGA fabric and the Linux operating system make the Raggedstone 4 a very cost effective, high performance, low power, computing platform.
Typical Applications
- Embedded computing
- Video Processing and Display
- Data Capture and Storage
- Industrial Control
- Custom Interface and Pre-processing
- Custom and High Performance ADC and DAC Interfaces.
Enterpoint’s DIL Module range offers a number of interface expansion options. Depending on the sizes of modules fitted one or more modules can be fitted in each of the Raggedstone 4 DIL Headers. A wide range of module functions are available including ADC, DAC, RS232, RS485, Opto-Isolated I/O, Touchscreen LCD and camera module.
OEM and Customised Options
As with all Enterpoint products the Raggedstone 4 design can either be offered in a custom BOM configuration or even a fully customised derivative product to suit individual customer needs. We can offer customised options for customers with very low annual volumes from 10 units+. We can also supply large volumes if required.
We can also offer an ultra-fast turn design and manufacture service for custom DIL Header modules.
If any of these custom options are of interest please contact us on
boardsales@enterpoint.co.uk.
Raggedstone 4
Block Diagram
Board Features
- x4 PCI Express™ Form Factor
- x4 Gen 1(Gen 2 possible) PCIe Interface
- Altera® SOC with twin ARM® Cortex™-A9
- Linux operating system support
- HPS boot from SPI Flash or SDcard
- Header for remote Reset Switches
- 110K LE of Programmable Logic
- 1 GByte DDR3
- 2 x SPI Flash
- 1 x 10/10/1000 Ethernet
- 1 x H/W MAC Address
- 1 x OTG USB I/F
- 1 x Real Time Clock
- 1 x 7 Segment LED Display
- 2 x DIL Header for add-on modules with 3.3V available for module power.
- 2 x Push Switches
- 4 LEDs
- 1 x MMC/SD® Card Socket
- Single 12V power input taken from 2.1MM Jack, Disk drive Connector or PCIe Interface
Raggedstone 4 is aimed at applications that need a hardware acceleration function, a custom I/O or interface requirement, a high accuracy interface timing function, high bandwidth input to a PC, or any combination of these features.
Raggedstone 4 normally operates inside a host PC plugged into a PCI Express slot. However it can also run as a standalone board powered through the 2.1mm jack or disk drive connector with a single 12V input.
The marriage of the powerful dual core ARM® Cortex™-A9 processor, a user programmable FPGA fabric and the Linux operating system make the Raggedstone 4 a very cost effective, high performance, low power, computing platform.
Typical Applications
- Embedded computing
- Video Processing and Display
- Data Capture and Storage
- Industrial Control
- Custom Interface and Pre-processing
- Custom and High Performance ADC and DAC Interfaces.
Enterpoint’s DIL Module range offers a number of interface expansion options. Depending on the sizes of modules fitted one or more modules can be fitted in each of the Raggedstone 4 DIL Headers. A wide range of module functions are available including ADC, DAC, RS232, RS485, Opto-Isolated I/O, Touchscreen LCD and camera module.
OEM and Customised Options
As with all Enterpoint products the Raggedstone 4 design can either be offered in a custom BOM configuration or even a fully customised derivative product to suit individual customer needs. We can offer customised options for customers with very low annual volumes from 10 units+. We can also supply large volumes if required.
We can also offer an ultra-fast turn design and manufacture service for custom DIL Header modules.
If any of these custom options are of interest please contact us on
boardsales@enterpoint.co.uk.
Raggedstone 4 SD Card Image
Raggedstone 4 DTB
Raggedstone 4 Product Page
Raggedstone 4 Build Environment Setup Scripts
Raggedstone 4 U-Boot Source
Raggedstone 4 User Manual