Arria10 SoC SoM developed by ReFLEX CES
A10 SoC SOM

20 Jan 2017 - 14:37 | Version 18 | | , , ,

A10SOM.JPG

The Arria10 SOM by ReFLEX CES provides developers the best Out-Of-The box experience combining the Best-In Class compact hardware platform and the most efficient intuitive software environment. Featuring an ARM dual-core Cortex-A9 MPCore and up to 660KLEs of advanced low-power FPGA logic elements, the Arria 10 SoC combines the flexibility and ease of programming of a CPU with the configurability and parallel processing power of an FPGA.

The target markets include but are not limited to: Automotive, Video Broadcast, Machine and Intelligent Vision, Industrial, Military, Test & Measurement and Medical.

This System On Module is also available in a Development Kit : the Achilles DevKit. We also offer a PCIe Carrier Board as an optional extra product compatible with any of ReFLEX CES Arria10 SoC SOM's, or can propose the design of a custom Carrier Board.

With this SOM, you can:

Processor
  • Dual ARM® Cortex™-A9 MPCore
  • Up to 1GHz
  • Enhanced with NEON Extension and Single & Double Precision Floating point unit
  • 32KB Instruction & 32KB Data L1 Cache
  • shared 512KB L2 Cache
  • 256KB on-chip Memory

FPGA
  • Arria 10 SX, F34 package
    • 10AS027H4F34E3SG, speed grade -3, 270K Logic elements (KLE)
    • 10AS066H4F34E3SG, speed grade -3, 660K Logic elements (KLE)
    • 10AS066H2F34I1SG, speed grade -1, 660K Logic elements (KLE)
    • M20K memory blocks 2,133
    • M20K memory (Mb) 42
    • MLAB memory (Mb) 5.7
    • GFLOPS 1,519

FPGA & Soft programming
  • AS configuration supported with EPCQL512, remote upgrade support and failsafe functionality: AS, Configuration via Protocol (CvP), OpenCL support
  • eMMC 32GBytes (HPS) / Store U-boot, Kernel and RootFS(8GB on 270 KLE and 32GB on 660 KLE), HPS programming

Control & Ios : Arria 10 SoC SoM
  • 1 x USB 3.0 device connectivity using Cypress FX3 super speed controller (660 KLE density)
  • 1 x USB OTG support connected to the HPS
  • 2 x 10/100/1000 Base-T Ethernet interfaces connected to the HPS
  • 1 x I²C slave interface (HPS can drive external device)
  • 1 x UART connected to the HPS
  • UART connected to System controller (MAX10)
  • PCIe gen3 x8 Edge interface (Hard IP)

Main interfaces 1.8V FMC VITA 57.1 compliant:*

System-on-Module usage
  • 1x FMC LPC bottom connector with HPS signals and 14 transceivers (Bottom-Right)
  • 1x FMC HPC or LPC bottom connector depending on FPGA density (Bottom-Left):
    • LPC bottom connector for 270KLE density
    • HPC bottom connector for 660KLE density

Carrier board usage with 2 interfaces
  • 1x FMC LPC Top connector with 10 transceivers (Top-Right)
  • 1x FMC HPC or LPC Top connector depending on FPGA density (Top-Left):◦LPC Top connector for 270KLE density
  • HPC Top connector for 660KLE density

24 Transceivers (up to 11.3Gbps)
  • 10x XCVR dedicated to FMC HPC Top connector or to the FMC HPC Bottom connector (Top or Bottom-Left)
  • 10x XCVR dedicated to FMC LPC Top connector or to the FMC LPC Bottom connector (Top or Bottom-Right)
  • 4x additional XCVR dedicated to the FMC LPC Bottom connector (Bottom-right)

LVDS and LVCMOS
  • 80 LVDS bidirectional (or 160 Single ended) on FMC HPC Top connector (Top or Bottom-Left)
  • 32 LVDS bidirectional (or 64 Single ended) on FMC LPC Top connector (Top or Bottom-Left)

Memory
  • DDR4 HPS (1 bank by 32bit, 2GBytes) @1866MT/s for speed grade -3
  • DDR4 FPGA (1 bank by 32bit, 2GBytes) @1866MT/s for speed grade -3

Power
  • Power Management Bus support (PMBus)
  • 35W nominal power consumption
  • Maximum 55W standalone power consumption (without FMC)
  • Maximum 103W power consumption (with Dual FMCs)
  • Compatible with heat spreader and heatsink (passive or active)

Form factor
  • Size : 86 mm x 95mm (3.4x3.8 inches)
  • 1 x Custom Heat Sink

In addition of the Arria 10 SoC SoM you can order the PCIe Carrier Board.

Configuration & Monitoring
  • On board USB Blaster JTAG configuration circuitry to enable FPGA configuration over USB connector.
  • One µUSB connector allows interfacing UART bus and communicate with the MAX 10 and the HPS FPGA.
  • One connector for connecting a Linear Powerplay DC1613A USB cabl
  • PMBus interface : Digital Power System management is ready, configure and interrogate the PSM Devices with LTpowerPlay

Communication Interfaces
  • PCI Express x8 2.5/5.0/8.0 Gbps (Gen 1, 2 or 3) on PCI Express edge connector
  • 1x QSFP+ quad optical cage (4 XCVR:10.3125 Gb/s per link)
  • 2x SFP+ single optical cage (2 XCVR : 10.3125 Gb/s per link)
  • 2x Ethernet 10/100/1000 Base-T (HPS)
  • 1x USB3.0 Micro B (FPGA)
  • 1x USB OTG Mini AB (HPS)
  • Atmel Wifi 802.11 b/g/n IoT (Internet of Things) module which is specifically optimized for low power IoT applications. Module provides SPI and SDIO to interface to host controller.
  • One 1x10pts connector for connecting an LCD

Board Size
  • Standard height ( 111.15 mm / 4.376 inches) x Half length ( 167.65 mm / 6.600 inches) / Fan on top for SoMA10

Power
  • Evaluation mode on desk with AC power supply or can be inserted into a PCIe slot and used as a PCIe card

Standards and compliance
  • RoHS/REACH compliant
  • UL certified
  • ISO9001 Facility
  • Operating Range : 0°C to 70°C
*There are four FMC connectors , but the two mirror connectors (Top and Botom on each side) share the same signals, the use of these two connector sis exclusive, one of the two connectors can be used at a time.

**Production Device with transceiver speed grade 3 can reach 11.3 Gb/s chip to chip links, The VITA 57.1 standard allows interfaces up to 10 Gb/s

Deliverables
  • Arria 10 SoC SoM
  • VHDL test designs
  • Mechanical files :3D DWF/STEP models and 2D drawing (upon request)
  • Guidelines for baseboard development (upon request)
  • Module Information(power consumption, decoupling, pairs lengths & impedances)

  • S-parameters (upon request)
  • Characterization report (upon request)

Ordering Information

Board "Lite" version // RXCA10S027PF34-SOM00L Board "Basic" version // RXCA10S027PF34-SOM00B Board "Ultra" version // RXCA10S066PF34-SOM00U Board "Turbo" version // RXCA10S066PF34-SOM00T

OpenCL BSP HPC (Host-In-x86) // RXCA10S0000F34-BSP0SB (upon request) OpenCL BSP HPC (Host-In-HPS) // RXCA10S0000F34-BSP0SD (upon request)

See more at : https://www.reflexces.com/products/boards/system-module/arria-10-soc-som

Give us your feedback

© 1999-2017 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Privacy.